CNC Router CKJ-R13
The CKJ R13 CNC router is one of our most popular machines thanks to its ability to hold sheets as large as 8ft x 4ft. The vacuum bed makes it super easy to change materials as needed.
Depending on your electrical supply, the spindle will be either 3.5kw (single phase) or 4.5kw (3 phase), providing peace of mind when working with harder materials.
Both the single and 3-phase vacuum pumps are fantastic, and each valve can be individually closed to achieve maximum suction in any given zone. If you’re working with 8ft x 4ft sheets, this machine is perfect for you.
- Linear square rail
- XYZ axis 1300 X 2500 X 200
- X and Y axis rack and pinon
- Z axis ball screw
- 240v Single Phase / 415v 3 phase
- 3.5 kw air cooled spindle / 4.5kw air cooled spindle (3 phase)
- Leadshine microstep drivers
- Oil lubrication system
- Vacuum bed with twin vac pumps 2 x 2.2kw (single phase) / 1 x 5.5kw vacuum pump (3 phase)
- Tool height calibration system
- 6mm and 12mm collets. ER32
- Refurbished windows 10 laptop with Vcarve Pro and Mach 3 software
- Set up and ready to run
- Basic Training given
- Delivery can be arranged
- Accurate to 0.02mm
Mach3 is an advanced CNC controller for DIY. You can also run this software on Industrial machines. It runs the G-Code on Windows PCs. And it creates a sophisticated control system to control the activity of motors and generators
Vectric Vcarve Pro is fantastic user-friendly software with many tutorial videos and has the capability to import 3D files
We have a post processor on this software created by Vectric for our machines.
Free trial software is available here:
www.vectric.com/free-trial/vcarve-pro
read more on the Vectric website: www.vectric.com
Delivery and set-up of machines up to 1500 mm, within a 100-mile radius of our headquarters in Stroud, Gloucestershire, will be charged at £600 + VAT
For machines over 1500 mm wide, extra carrier fees will apply.
We purchased a CKJ-R13 router machine from CKJ. Great machine! the training we had from CKJ was amazing. We have been running this machine for over 5 months now with no issues. It’s doing a fantastic job. This is a very well designed tool. Prior to purchase I had no CNC experience. Sometimes I have issues with the software due to inexperience. Any issues I am able to contact CKJ directly any time and they got us back up and running within an hour. It is really very helpful as well. CKJ Customer service is great! I highly recommend this kit to anyone wanting to get into the CNC world and buying from CKJ. WE would buy again.
Anan ( G.C.L. )Quick Enquiry
If you would like to arrange a demo or have any questions, please use the form below. Alternately, please use the button in the bottom left to call us.
"*" indicates required fields
Related Articles
Can the design software Ucancam import preexisting files ?
Yes Ucancam can import any of the follwing files (.AI .DXF .EPS .PLT .BMP .JPG .JPEG .GIF .TIF .PNG) most design software have the capability of exporting in these formats.
Do I need a compressor for the L8 series router ?
Yes. Our L8 series routers will need a compressor with a capacity of delivering at least 8 BAR of pressure. This is needed to change tool. The tool is pushed out using compressed air and is clamped in the spindle using it too. It also works the dust hood and the pop up pin locators […]
Do I need an air compressor for the R series routers?
For the R series routers air is not needed. Our R series routers do not need any air due to the spindle being a self change and the machine has no pop up locators. We did this as many machines on the market need them and with our R series we try to keep your […]
